PART # 8M6004829

NMEA 2000 T CONNECTOR

ADAPTOR, 6" NMEA 2000 AGI AND HELMASTER

Part # 8M0114012

Kit includes:

• NMEA2000 power harness
• 1 male termination resistor
• 1 female termination resistor
• "T" connector

Whenever a NMEA2000 backbone is required, these are the basic components required to start that architecture.

Part # 60V-8A4L1-18-00RET

Superseded from Part # 60V-8A4L1-17-00, 60V-8A4L1-16-00, 60V-8A4L1-14-00, 60V-8A4L1-13-00, 60V-8A4L1-12-00, 60V-8A4L1-11-00, 60V-8A4L1-10-00

Part # 60V-8A4L1-1A-00

Superseded from Part # 60V-8A4L1-17-00, 60V-8A4L1-16-00, 60V-8A4L1-14-00, 60V-8A4L1-13-00, 60V-8A4L1-12-00, 60V-8A4L1-11-00, 60V-8A4L1-10-00, 60V-8A4L1-18-00

For use with Command Link Gauges.

Part # 6AW-8366B-01-00

Superseded from Part # 6AW-8366B-00-00

Part # 69J-8A4L0-15-00

Superseded from Part # 69J-8A4L0-14-00, 69J-8A4L0-13-00, 69J-8A4L0-12-00, 69J-8A4L0-11-00, 69J-8A4L0-10-00, 69J-8A4L0-00-00

Part # 60V-8A4L0-1A-00

Superseded from Part # 60V-8A4L0-19-00, 60V-8A4L0-18-00, 60V-8A4L0-17-00, 60V-8A4L0-16-00, 60V-8A4L0-15-00, 60V-8A4L0-14-00, 60V-8A4L0-12-00, 60V-8A4L0-11-00, 60V-8A4L0-10-00, 60V-8A4L0-01-00, 60V-8A4L0-13-00

Part # 6YG-8A2D0-00-00

This Product REPLACES Part # 6Y9-8A2D0-40-00, MAR-GTWAY-ML-09 AND MAR-GTWAY-KT-00

Yamaha NMEA 2000 Gateway device. Works with both the Command Link Plus color display and Command Link square or round gauge systems. This part is for the gateway only and does not come with the pigtail buss wire that is needed. 1 FT (or longer) pigtail buss wire is required to connect the gateway to 3-port Command link hub. A open port on the Command link 3-port hub will be needed. If one is not available, another 3 port hub will need to be installed: 6Y8-81920-01-00KIT

Part # 6YG-8A2D0-00-00

Includes pigtail wire 6Y8-82521-01-00. This Product REPLACES Part # 6Y9-8A2D0-40-00, MAR-GTWAY-ML-09 AND MAR-GTWAY-KT-00

Yamaha NMEA 2000 Gateway device. Works with both the Command Link Plus color display and Command Link square or round gauge systems. 1 FT (or longer) pigtail buss wire is required to connect the gateway to 3-port Command link hub. A open port on the Command link 3-port hub will be needed. If one is not available, another 3 port hub will need to be installed: 6Y8-81920-01-00KIT

Part # MAR-GTWAY-KT-20

1 each 1 Ft Pigtail Buss Wire: 6Y8-82521-01-00
1 each Command Link Plus and Gateway: 6YG-8A2D0-00-00
1 each N2K Harness

This Product REPLACES Part # 6Y9-8A2D0-40-00, MAR-GTWAY-ML-09 AND MAR-GTWAY-KT-00, MAR-GTWAY-KT-10

Yamaha NMEA 2000 Gateway device. Works with both Command Link Plus color display, 6YC Display and Command Link square or round gauge systems. Kit Includes the 1 FT Pigtail buss wire required to connect the gateway to a 3-port Command link hub. A open port on the Command link 3-port hub will be needed. If one is not available, another 3 port hub will need to be installed: 6Y8-81920-01-00KIT